Root Cause Identified
SSF (side-shift frame) moves in opposite direction to the one shown by the control button on the app.
🚚
Who can fix this
Machine Distributor
📖
Manual
Section 8.3.3 – Centering on the Crop Rows
Open in manual
The SSF solenoid wiring may be inverted (coils connected to wrong outputs), or a calibration issue.
- 1 Verify: pressing the left/right arrow in the Weeding page should shift the frame in the same direction.
- 2 If the coil plugs of the SSF have an embedded LED, check that the LED of the left/right coil is lit when the command to go left/right is given on the app.